manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 370 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 370

Chapter 10

  |  Access Control Lists

IPv6 ACLs

–  370  –

Default Setting

None

Command Mode

Standard IPv6 ACL

Command Usage

New rules are appended to the end of the list.

Example 

This example configures one permit rule for the specific address 2009:DB9:2229::79 
and another rule for the addresses with the network prefix 2009:DB9:2229:5::/64.

Console(config-std-ipv6-acl)#permit host 2009:DB9:2229::79

Console(config-std-ipv6-acl)#permit 2009:DB9:2229:5::/64

Console(config-std-ipv6-acl)#

Related Commands

access-list ipv6 (368)
Time Range (168)

permit, deny

(Extended IPv6 ACL)

This command adds a rule to an Extended IPv6 ACL. The rule sets a filter condition 
for packets with specific destination IP addresses, next header type, or flow label. 
Use the 

no

 form to remove a rule.

Syntax

{

permit

 | 

deny

} {

any

 | 

host

destination-ipv6-address 

| 

destination-ipv6-address

[

/prefix-length

]} [

time-range

 

time-range-name

]

no

 {

permit

 | 

deny

} {

any

 | 

host

destination-ipv6-address 

| 

destination-ipv6-address

[

/prefix-length

]}

any 

– Any IP address (an abbreviation for the IPv6 prefix ::/0).

host 

– Keyword followed by a specific destination IP address.

destination-ipv6-address

 - An IPv6 destination address or network class. The 

address must be formatted according to RFC 2373 “IPv6 Addressing 
Architecture,” using 8 colon-separated 16-bit hexadecimal values. One 
double colon may be used in the address to indicate the appropriate 
number of zeros required to fill the undefined fields. 

prefix-length

 - A decimal value indicating how many contiguous bits (from 

the left) of the address comprise the prefix; i.e., the network portion of the 
address. (Range: 0-128)

time-range-name

 - Name of the time range. (Range: 1-32 characters)

Default Setting

None

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов