manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 346 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 346

Chapter 9

  |  General Security Measures

ARP Inspection

–  346  –

◆

If static mode is not enabled, packets are first validated against the specified 
ARP ACL. Packets matching a deny rule are dropped. All remaining packets are 
validated against the address bindings in the DHCP snooping database.

Example

Console(config)#ip arp inspection filter sales vlan 1

Console(config)#

ip arp inspection

log-buffer logs

This command sets the maximum number of entries saved in a log message, and 
the rate at which these messages are sent. Use the 

no

 form to restore the default 

settings.

Syntax 

ip arp inspection log-buffer logs

 

message-number

 

interval

 

seconds

 

no ip arp inspection log-buffer logs

message-number

 - The maximum number of entries saved in a log message. 

(Range: 0-256, where 0 means no events are saved and no messages sent)

seconds

 - The interval at which log messages are sent. (Range: 0-86400)

Default Setting 

Message Number: 20
Interval: 10 seconds 

Command Mode

Global Configuration

Command Usage

◆

ARP Inspection must be enabled with the 

ip arp inspection

 command before 

this command will be accepted by the switch.

◆

By default, logging is active for ARP Inspection, and cannot be disabled. 

◆

When the switch drops a packet, it places an entry in the log buffer. Each entry 
contains flow information, such as the receiving VLAN, the port number, the 
source and destination IP addresses, and the source and destination MAC 
addresses.

◆

If multiple, identical invalid ARP packets are received consecutively on the 
same VLAN, then the logging facility will only generate one entry in the log 
buffer and one corresponding system message.

◆

The maximum number of entries that can be stored in the log buffer is 
determined by the 

message-number

 parameter. If the log buffer fills up before a 

message is sent, the oldest entry will be replaced with the newest one.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов