manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 870 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 870

Chapter 30

  |  IP Interface Commands

IPv6 Interface

–  870  –

ND advertised reachable time is 0 milliseconds

ND advertised router lifetime is 1800 seconds

Console#

Related Commands 

ipv6 address link-local (867)
show ipv6 interface (871)

ipv6 mtu

This command sets the size of the maximum transmission unit (MTU) for IPv6 
packets sent on an interface. Use the 

no

 form to restore the default setting.

Syntax 

ipv6 mtu 

size

no ipv6 mtu

size

 - Specifies the MTU size. (Range: 1280-65535 bytes)

Default Setting 

1500 bytes

Command Mode 

Interface Configuration (VLAN)

Command Usage 

◆

If a non-default value is configured, an MTU option is included in the router 
advertisements sent from this device.

◆

The maximum value set by this command cannot exceed the MTU of the 
physical interface, which is currently fixed at 1500 bytes.

◆

IPv6 routers do not fragment IPv6 packets forwarded from other routers. 
However, traffic originating from an end-station connected to an IPv6 router 
may be fragmented. 

◆

All devices on the same physical medium must use the same MTU in order to 
operate correctly. 

◆

IPv6 must be enabled on an interface before the MTU can be set.

Example 

The following example sets the MTU for VLAN 1 to 1280 bytes:

Console(config)#interface vlan 1

Console(config-if)#ipv6 mtu 1280

Console(config-if)#

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов