manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 417 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 417

Chapter 11

  |  Interface Commands

Transceiver Threshold Configuration

–  417  –

 Vendor SN             : PFS4U5F

 Date Code             : 09-07-02

 DDM Info

   Temperature         : 31.36 degree C

   Vcc                 : 3.32 V

   Bias Current        : 25.61 mA

   TX Power            : -3.11 dBm

   RX Power            : -40.00 dBm

 DDM Thresholds

                            Low Alarm   Low Warning  High Warning    High Alarm

   -----------           ------------  ------------  ------------  ------------

   Temperature(Celsius)        -25.00        -20.00         90.00         95.00

   Voltage(Volts)                2.80          2.90          3.70          3.80

   Current(mA)                   2.00          3.00         80.00         90.00

   TxPower(dBm)                 -7.96         -6.99          1.00          2.01

   RxPower(dBm)                -20.00        -19.00          0.00          1.00

Console#

show interfaces

transceiver-threshold

This command Displays the alarm/warning thresholds for temperature, 
voltage, bias current, transmit power, and receive power. 

Syntax 

Syntax 

show interfaces transceiver-threshold

 [

interface

]

interface

 

ethernet

 

unit

/

port

unit

 - Unit identifier. (Range: 1) 

port

 - Port number. (ECS4120-28F SFP+ Ports 25-28

19

, 

Other models: SFP/SFP+ Ports) 

Default Setting 

Shows all SFP interfaces.

Command Mode 

Privileged Exec

Command Usage 

◆

The switch can display diagnostic information for SFP modules which support 
the SFF-8472 Specification for Diagnostic Monitoring Interface for Optical 
Transceivers. This information allows administrators to remotely diagnose 
problems with optical devices. This feature, referred to as Digital Diagnostic 
Monitoring (DDM) in the command display, provides information on 
transceiver parameters including temperature, supply voltage, laser bias 
current, laser power, received optical power, and related alarm thresholds. 

◆

The DDM thresholds displayed by this command only apply to ports which 
have a DDM-compliant transceiver inserted.

19. Due to a chip limitation, transceiver data cannot be displayed on ports 1-20 on the ECS4120-28F.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов