Edge-Core ECS4120-28F Скачать руководство пользователя страница 453

Страница: 453 / 938

Chapter 14

| Port Mirroring Commands

RSPAN Mirroring Commands

– 453 –

◆

Only ports can be configured as an RSPAN destination – static and dynamic
trunks are not allowed.

◆

The source port and destination port cannot be configured on the same switch.

◆

A destination port can still send and receive switched traffic, and participate in
any Layer 2 protocols to which it has been assigned.

Example

The following example configures port 4 to receive mirrored RSPAN traffic:

Console(config)#rspan session 1 destination interface ethernet 1/4

Console(config)#

rspan remote vlan

Use this command to specify the RSPAN VLAN, switch role (source, intermediate or
destination), and the uplink ports. Use the

form to disable the RSPAN on the

specified VLAN.

Syntax

[

]

rspan session

session-id

remote vlan

vlan-id

{

source

intermediate

destination

}

uplink

interface

session-id

– A number identifying this RSPAN session. (Range: 1)

vlan-id

- ID of configured RSPAN VLAN. (Range: 1-4094)

Use the

vlan

rspan

command to reserve a VLAN for RSPAN mirroring before

enabling RSPAN with this command.

source

- Specifies this device as the source of remotely mirrored traffic.

intermediate

- Specifies this device as an intermediate switch,

transparently passing mirrored traffic from one or more sources to one or
more destinations.

destination

- Specifies this device as a switch configured with a destination

port which is to receive mirrored traffic for this session.

uplink

- A port configured to receive or transmit remotely mirrored traffic.

interface

ethernet

unit

port

ethernet

unit

port

unit

- Unit identifier. (Range: 1)

port

- Port number. (Range: 1-28/52)

Default Setting

None

Command Mode

Global Configuration

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание ECS4120-28F

Отзывы:

Edge-Core ECS4120-28F, Справочное руководство, Страница: 453 / 938

Результаты поиска

Содержание ECS4120-28F

Отзывы: