manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 821 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 821

Chapter 27

  |  OAM Commands

–  821  –

Command Usage 

◆

OAM remote loop back can be used for fault localization and link performance 
testing. Statistics from both the local and remote DTE can be queried and 
compared at any time during loop back testing. 

◆

Use the 

efm oam remote-loopback start

 command to start OAM remote loop 

back test mode on the specified port. Afterwards, use the 

efm oam remote-

loopback test

 command to start sending test packets. Then use the 

efm oam 

remote loopback stop

 command to terminate testing (if test packets are still 

being sent) and to terminate loop back test mode. 

◆

The port that you specify to run this test must be connected to a peer OAM 
device capable of entering into OAM remote loopback mode.

◆

During a remote loopback test, the remote OAM entity loops back every frame 
except for OAMPDUs and pause frames.

◆

During loopback testing, both the switch and remote device are permitted to 
send OAMPDUs to the peer device and to process any OAMPDUs received from 
the peer.

Example

Console#efm oam remote-loopback start 1/1

Loopback operation is processing, please wait.

Enter loopback mode succeeded.

Console#

efm oam remote-

loopback test

This command performs a remote loopback test, sending a specified number of 
packets.

Syntax

efm oam remote-loopback test

 

interface

 [

number-of-packets

 [

packet-size

]]

interface

 - 

unit

/

port

 

unit

 - Unit identifier. (Range: 1)

port

 - Port number. (Range: 1-28/52) 

number-of-packets

 - Number of packets to send. (Range: 1-99999999)

packet-size

 - Size of packets to send. (Range: 64-1518 bytes)

Default Setting 

Number of packets: 10,000
Packet size: 64 bytes

Command Mode 

Privileged Exec

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов