Edge-Core ECS4120-28F Скачать руководство пользователя страница 429 | Manualshive

Страница: 429 / 938

Edge-Core ECS4120-28F Скачать руководство пользователя страница 429

Chapter 12

| Link Aggregation Commands

Dynamic Configuration Commands

– 429 –

Example

The following example creates trunk 1 and then adds port 10-12:

Console(config)#interface port-channel 1

Console(config-if)#exit

Console(config)#interface ethernet 1/10-12

Console(config-if)#channel-group 1

Console(config-if)#

Dynamic Configuration Commands

lacp

This command enables 802.3ad Link Aggregation Control Protocol (LACP) for the
current interface. Use the

no

form to disable it.

Syntax

[

no

]

lacp

Default Setting

Disabled

Command Mode

Interface Configuration (Ethernet)

Command Usage

◆

The ports on both ends of an LACP trunk must be configured for full duplex,
either by forced mode or auto-negotiation.

◆

A trunk formed with another switch using LACP will automatically be assigned
the next available port-channel ID.

◆

If the target switch has also enabled LACP on the connected ports, the trunk
will be activated automatically.

◆

If more than eight ports attached to the same target switch have LACP enabled,
the additional ports will be placed in standby mode, and will only be enabled if
one of the active links fails.

«
...
427
428
429
430
431
...
»

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов