manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 683 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 683

Chapter 24

  |  Multicast Filtering Commands

MLD Snooping

–  683  –

Example

Console(config)#ipv6 mld snooping version 1

Console(config)# 

ipv6 mld snooping

vlan immediate-leave

This command immediately deletes a member port of an IPv6 multicast service 
when a leave packet is received at that port and immediate-leave is enabled for the 
parent VLAN. Use the 

no

 form to restore the default.

Syntax 

[

no

] 

ipv6 mld snooping vlan 

vlan-id

 

immediate-leave

vlan-id

 - A VLAN identification number. (Range: 1-4094)

Default Setting 

Disabled

Command Mode 

Global Configuration

Command Usage 

◆

If MLD immediate-leave is 

not

 used, a multicast router (or querier) will send a 

group-specific query message when an MLD group leave message is received. 
The router/querier stops forwarding traffic for that group only if no host replies 
to the query within the specified timeout period.

◆

If MLD immediate-leave is enabled, the switch assumes that only one host is 
connected to the interface. Therefore, immediate leave should only be enabled 
on an interface if it is connected to only one MLD-enabled device, either a 
service host or a neighbor running MLD snooping. 

Example 

The following shows how to enable MLD immediate leave.

Console(config)#interface vlan 1

Console(config-if)#ipv6 mld snooping immediate-leave

Console(config-if)#      

ipv6 mld snooping

vlan mrouter

This command statically configures an IPv6 multicast router port. Use the 

no

 form 

to remove the configuration.

Syntax 

[

no

] 

ipv6 mld snooping vlan

 

vlan-id

 

mrouter

 

interface

vlan-id

 - VLAN ID (Range: 1-4094) 

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов