Edge-Core ECS4120-28F, Справочное руководство, Страница: 402 / 938

Chapter 11
| Interface Commands
Interface Configuration
– 402 –
QLen Output The length of the output packet queue (in packets).
Extended IF Table Stats
Multicast Input The number of packets, delivered by this sub-layer to a higher (sub-
)layer, which were addressed to a multicast address at this sub-layer.
Multicast Output The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a multicast address at this
sub-layer, including those that were discarded or not sent.
Broadcast Input The number of packets, delivered by this sub-layer to a higher (sub-
)layer, which were addressed to a broadcast address at this sub-layer.
Broadcast Output The total number of packets that higher-level protocols requested be
transmitted, and which were addressed to a broadcast address at this
sub-layer, including those that were discarded or not sent.
Etherlike Statistics
Alignment Errors The number of alignment errors (missynchronized data packets).
FCS Errors A count of frames received on a particular interface that are an integral
number of octets in length but do not pass the FCS check. This count
does not include frames received with frame-too-long or frame-too-
short error.
Single Collision Frames The number of successfully transmitted frames for which transmission
is inhibited by exactly one collision.
Multiple Collision Frames A count of successfully transmitted frames for which transmission is
inhibited by more than one collision.
SQE Test Errors A count of times that the SQE TEST ERROR message is generated by the
PLS sublayer for a particular interface.
Deferred Transmissions A count of frames for which the first transmission attempt on a
particular interface is delayed because the medium was busy.
Late Collisions The number of times that a collision is detected later than 512 bit-times
into the transmission of a packet.
Excessive Collisions A count of frames for which transmission on a particular interface fails
due to excessive collisions. This counter does not increment when the
interface is operating in full-duplex mode.
Internal MAC Transmit
Errors A count of frames for which transmission on a particular interface fails
due to an internal MAC sublayer transmit error.
Internal MAC Receive Errors A count of frames for which reception on a particular interface fails due
to an internal MAC sublayer receive error.
Frames Too Long A count of frames received on a particular interface that exceed the
maximum permitted frame size.
Carrier Sense Errors The number of times that the carrier sense condition was lost or never
asserted when attempting to transmit a frame.
Table 75: show interfaces counters - display description
(Continued)
Parameter Description