manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 839 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 839

Chapter 29

  |  DHCP Commands

DHCP Client

–  839  –

◆

Note that the vendor class identifier can be formatted in either text or 
hexadecimal using the 

ip dhcp client class-id

 command, but the format used 

by both the client and server must be the same.

Example

Console(config)#interface vlan 2

Console(config-if)#ip dhcp client class-id hex 0000e8666572

Console(config-if)#

Related Commands

ip dhcp restart client (839)

ip dhcp restart client

This command submits a BOOTP or DHCP client request.

Default Setting 

None

Command Mode 

Privileged Exec

Command Usage 

◆

This command issues a BOOTP or DHCP client request for any IP interface that 
has been set to BOOTP or DHCP mode through the 

ip address

 command.

◆

DHCP requires the server to reassign the client’s last address if available. 

◆

If the BOOTP or DHCP server has been moved to a different domain, the 
network portion of the address provided to the client will be based on this new 
domain. 

Example 

In the following example, the device is reassigned the same address.

Console(config)#interface vlan 1

Console(config-if)#ip address dhcp

Console(config-if)#exit

Console#ip dhcp restart client

Console#show ip interface

VLAN 1 is Administrative Up - Link Up

  Address is 12-34-12-34-12-34

  Index: 1001, MTU: 1500

  Address Mode is DHCP

  IP Address: 192.168.0.9 Mask: 255.255.255.0

  DHCP Client Vendor Class ID (text): ECS4120-28T

Console#

Related Commands 

 

ip address (850)

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов