manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 803 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 803

Chapter 26

  |  CFM Commands

Link Trace Operations

–  803  –

Command Mode 

Global Configuration

Command Usage 

◆

A link trace message is a multicast CFM frame initiated by a MEP, and forwarded 
from MIP to MIP, with each MIP generating a link trace reply, up to the point at 
which the link trace message reaches its destination or can no longer be 
forwarded.

◆

Use this command to enable the link trace cache to store the results of link 
trace operations initiated on this device. Use the 

ethernet cfm linktrace

 

command to transmit a link trace message.

◆

Link trace responses are returned from each MIP along the path and from the 
target MEP. Information stored in the cache includes the maintenance domain 
name, MA name, MEPID, sequence number, and TTL value.

Example

This example enables link trace caching.

Console(config)#ethernet cfm linktrace cache

Console(config)#

ethernet cfm linktrace

cache hold-time

This command sets the hold time for CFM link trace cache entries. Use the 

no

 form 

to restore the default setting.

Syntax

ethernet cfm linktrace cache hold-time

 

minutes

minutes – 

The aging time for entries stored in the link trace cache. 

(Range: 1-65535 minutes)

Default Setting 

100 minutes

Command Mode 

Global Configuration

Command Usage 

Before setting the aging time for cache entries, the cache must first be enabled 
with the 

ethernet cfm linktrace cache

 command.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов