manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 717 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 717

Chapter 24

  |  Multicast Filtering Commands

MVR for IPv4

–  717  –

interface

ethernet

 

unit

/

port

unit

 - Unit identifier. (Range: 1) 

port

 - Port number. (Range: 1-28/52)

port-channel

 

channel-id

 (Range: 1-16) 

vlan

 vlan-id

 - VLAN ID (Range: 1-4094) 

query

 - Displays MVR query-related statistics.

summary

 - Displays summary of MVR statistics.

mvr vlan

 - Displays summary statistics for the MVR VLAN.

Default Setting 

Displays statistics for all domains.

Command Mode 

Privileged Exec

Example 

The following shows MVR protocol-related statistics received:

Console#show mvr domain 1 statistics input

 MVR Domain : 1

 Input Statistics:

 Interface Report   Leave    G Query  G(-S)-S Query Drop     Join Succ Group

 --------- -------- -------- -------- ------------- -------- --------- ------

 Eth 1/ 1        23       11        4            10        5        20      9

 Eth 1/ 2        12       15        8            3         5        19      4

 VLAN    1        2        0        0             2        2        20      9

Console#

Table 142: show mvr statistics input - display description  

Field

Description

Interface

Shows interfaces attached to the MVR.

Report

The number of IGMP membership reports received on this interface.

Leave

The number of leave messages received on this interface.

G Query

The number of general query messages received on this interface.

G(-S)-S Query

The number of group specific or group-and-source specific query 
messages received on this interface.

Drop

The number of times a report, leave or query was dropped. Packets may 
be dropped due to invalid format, rate limiting, packet content not 
allowed, or MVR group report received

Join Succ

The number of times a multicast group was successfully joined.

Group

The number of MVR groups active on this interface.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов