manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 863 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 863

Chapter 30

  |  IP Interface Commands

IPv6 Interface

–  863  –

Related Commands 

ip route (898)
show ip route (899)
ip default-gateway (852)
show ipv6 default-gateway (871)

ipv6 address

This command configures an IPv6 global unicast address and enables IPv6 on an 
interface. Use the 

no

 form without any arguments to remove all IPv6 addresses 

from the interface, or use the 

no

 form with a specific IPv6 address to remove that 

address from the interface.

Syntax 

[

no

]

 ipv6 address

 

ipv6-address

[/

prefix-length

]

ipv6-address

 - A full IPv6 address including the network prefix and host 

address bits.

prefix-length

 - A decimal value indicating how many contiguous bits (from 

the left) of the address comprise the prefix (i.e., the network portion of the 
address). 

Default Setting 

No IPv6 addresses are defined

Command Mode 

Interface Configuration (VLAN)

Command Usage 

◆

All IPv6 addresses must be according to RFC 2373 “IPv6 Addressing 
Architecture,” using 8 colon-separated 16-bit hexadecimal values. One double 
colon may be used in the address to indicate the appropriate number of zeros 
required to fill the undefined fields.

◆

To connect to a larger network with multiple subnets, you must configure a 
global unicast address. This address can be manually configured with this 
command, or it can be automatically configured using the 

ipv6 address 

autoconfig

 command.

◆

If a link-local address has not yet been assigned to this interface, this command 
will assign the specified static global unicast address and also dynamically 
generate a link-local unicast address for the interface. (The link-local address is 
made with an address prefix of FE80 and a host portion based the switch’s MAC 
address in modified EUI-64 format.)

◆

If a duplicate address is detected, a warning message is sent to the console.

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов