manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 273 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 273

Chapter 8

  |  Authentication Commands

PPPoE Intermediate Agent

–  273  –

Command Usage 

◆

The PPPoE server extracts the Line-ID tag from PPPoE discovery stage 
messages, and uses the Circuit-ID field of that tag as a NAS-Port-Id attribute in 
AAA access and accounting requests. 

◆

The switch intercepts PPPoE discovery frames from the client and inserts a 
unique line identifier using the PPPoE Vendor-Specific tag (0x0105) to PPPoE 
Active Discovery Initiation (PADI) and Request (PADR) packets. The switch then 
forwards these packets to the PPPoE server. The tag contains the Line-Id of the 
customer line over which the discovery packet was received, entering the 
switch (or access node) where the intermediate agent resides. 

◆

Outgoing PAD Offer (PADO) and Session-confirmation (PADS) packets sent from 
the PPPoE Server include the Circuit-ID tag inserted by the switch, and should 
be stripped out of PADO and PADS packets which are to be passed directly to 
end-node clients using the 

pppoe intermediate-agent vendor-tag strip

 

command.

◆

If the remote-id is unspecified, the port name will be used for this parameter. If 
the port name is not configured, the remote-id is set to the port MAC (yy-yy-yy-
yy-yy-yy#), where # is the default delimiter.

Example

Console(config)#interface ethernet 1/5

Console(config-if)#pppoe intermediate-agent port-format-type circuit-id 

ECS4120-28T

Console(config-if)#

pppoe

intermediate-agent

port-format-type

remote-id

This command sets the remote-id delimiter for an interface. Use the 

enable

 

keyword to enable the delimiter. Use the 

no

 form with the 

enable

 keyword to 

disable the delimiter. Use the 

no

 form without any keywords toto restore the 

default settings.

Syntax 

pppoe intermediate-agent port-format-type

 

remote-id 

{

enable

 | 

ascii-code

}

ascii-code

 - ASCII character of delimiter. (Range: 0-255)

Default Setting 

None

Command Mode 

Interface Configuration (Ethernet, Port Channel)

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов