Edge-Core ECS4120-28F, Справочное руководство, Страница: 860 / 938

Chapter 30
| IP Interface Commands
IPv4 Interface
– 860 –
clear arp-cache
This command deletes all dynamic entries from the Address Resolution Protocol
(ARP) cache.
Command Mode
Privileged Exec
Example
This example clears all dynamic entries in the ARP cache.
Console#clear arp-cache
This operation will delete all the dynamic entries in ARP Cache.
Do you want to continue this operation (y/n)?y
Console#
show arp
This command displays entries in the Address Resolution Protocol (ARP) cache.
Command Mode
Normal Exec, Privileged Exec
Command Usage
◆
This command displays information about the ARP cache. The first line shows
the cache timeout. It also shows each cache entry, including the IP address,
MAC address, type (static, dynamic, other), and VLAN interface. Note that entry
type “other” indicates local addresses for this router.
◆
Static entries are only displayed for VLANs that are up. In other words, static
entries are only displayed when configured for the IP subnet of a existing VLAN,
and that VLAN is linked up.
Example
This example displays all entries in the ARP cache.
Console#show arp
ARP Cache Timeout: 1200 (seconds)
IP Address MAC Address Type Interface
--------------- ----------------- --------- -----------
10.1.0.0 FF-FF-FF-FF-FF-FF other VLAN1
10.1.0.254 00-00-AB-CD-00-00 other VLAN1
10.1.0.255 FF-FF-FF-FF-FF-FF other VLAN1
145.30.20.23 09-50-40-30-20-10 dynamic VLAN3
Total entry : 5
Console#