manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 387 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 387

Chapter 11

  |  Interface Commands

Interface Configuration

–  387  –

Interface Configuration

interface

This command configures an interface type and enters interface configuration 
mode. Use the 

no

 form with a trunk to remove an inactive interface. Use the 

no

 

form with a Layer 3 VLAN (normal type) to change it back to a Layer 2 interface.

Syntax

[

no

] 

interface

 

interface-list

interface-list

 – One or more ports. Use a hyphen to indicate a consecutive 

list of ports or a comma between non-consecutive ports. 

craft

 - Management port on the front panel.

ethernet

 

unit

/

port-list

unit

 - Unit identifier. (Range: 1)

port-list

 - Physical port number or list of port numbers. Separate 

nonconsecutive port numbers with a comma and no spaces; or use 
a hyphen to designate a range of port numbers. (Range: 1-28/52) 

port-channel

 

channel-id

 (Range: 1-26) 

vlan

 

vlan-id

 (Range: 1-4094) 

Default Setting 

None

Command Mode 

Global Configuration 

Example 

To specify several different ports, enter the following command:

Console(config)#interface ethernet 1/17-20,23

Console(config-if)#

alias

This command configures an alias name for the interface. Use the 

no

 form to 

remove the alias name.

Syntax 

alias

 

string

no alias

string

 - A mnemonic name to help you remember what is attached to this 

interface. (Range: 1-64 characters)

Default Setting 

None

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов