manualshive.com logo in svg

Edge-Core ECS4120-28F, Справочное руководство, Страница: 268 / 938

Поделиться
Скачать
Edge-Core ECS4120-28F Скачать руководство пользователя страница 268

Chapter 8

  |  Authentication Commands

Management IP Filter

–  268  –

management

This command specifies the client IP addresses that are allowed management 
access to the switch through various protocols. A list of up to 15 IP addresses or IP 
address groups can be specified. Use the 

no

 form to restore the default setting.

Syntax 

[

no

] 

management

 {

all-client

 | 

http-client

 | 

snmp-client

 | 

telnet-client

} 

start-address

 [

end-address

]

all-client

 - Adds IP address(es) to all groups.

http-client

 - 

Adds IP address(es) to the web group.

snmp-client

 - 

Adds IP address(es) to the SNMP group.

telnet-client

 - Adds IP address(es) to the Telnet group.

start-address

 - A single IP address, or the starting address of a range.

end-address

 - The end address of a range.

Default Setting 

All addresses

Command Mode 

Global Configuration

Command Usage 

◆

The management interfaces are open to all IP addresses by default. Once you 
add an entry to a filter list, access to that interface is restricted to the specified 
addresses.

◆

If anyone tries to access a management interface on the switch from an invalid 
address, the switch will reject the connection, enter an event message in the 
system log, and send a trap message to the trap manager.

◆

IP address can be configured for SNMP, web, and Telnet access respectively. 
Each of these groups can include up to five different sets of addresses, either 
individual addresses or address ranges. 

◆

When entering addresses for the same group (i.e., SNMP, web, or Telnet), the 
switch will not accept overlapping address ranges. When entering addresses 
for different groups, the switch will accept overlapping address ranges.

◆

You cannot delete an individual address from a specified range. You must 
delete the entire range, and re-enter the addresses.

◆

You can delete an address range just by specifying the start address, or by 
specifying both the start address and end address. 

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов