Edge-Core ECS4120-28F Скачать руководство пользователя страница 326 | Manualshive

Страница: 326 / 938

Edge-Core ECS4120-28F Скачать руководство пользователя страница 326

Chapter 9

| General Security Measures

DHCPv6 Snooping

– 326 –

Example

This example configures the switch to keep existing remote-id option 37
information within DHCPv6 client packets and forward it.

Console(config)#ipv6 dhcp snooping option remote-id policy keep

Console(config)#

ipv6 dhcp snooping

vlan

This command enables DHCPv6 snooping on the specified VLAN. Use the

no

form

to restore the default setting.

Syntax

[

no

]

ipv6 dhcp snooping vlan

{

vlan-id

|

vlan-range

}

vlan-id

- ID of a configured VLAN (Range: 1-4094)

vlan-range

- A consecutive range of VLANs indicated by the use a hyphen,

or a random group of VLANs with each entry separated by a comma.

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

◆

When DHCPv6 snooping enabled globally using the

ipv6 dhcp snooping

command, and enabled on a VLAN with this command, DHCPv6 packet
filtering will be performed on any untrusted ports within the VLAN as specified
by the

ipv6 dhcp snooping trust

command.

◆

When the DHCPv6 snooping is globally disabled, DHCPv6 snooping can still be
configured for specific VLANs, but the changes will not take effect until DHCPv6
snooping is globally re-enabled.

◆

When DHCPv6 snooping is enabled globally, and then disabled on a VLAN, all
dynamic bindings learned for this VLAN are removed from the binding table.

Example

This example enables DHCP6 snooping for VLAN 1.

Console(config)#ipv6 dhcp snooping vlan 1

Console(config)#

Related Commands

ipv6 dhcp snooping (321)
ipv6 dhcp snooping trust (327)

«
...
324
325
326
327
328
...
»

Содержание ECS4120-28F











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов