8
USING THE SYSTEM
Starting the System
Press the
POWER button
on the front panel to turn the system ON/OFF.
NOTE:
Make sure all cameras and cables are properly connected prior to powering on the
system
At startup, the system performs a basic system check and runs an initial loading sequence.* After
a few moments, the system loads a live display view.
Password
You do not have to enter a password upon initial startup. However, for security measures, you
should change your ADMIN and user passwords after first purchasing the system. See
“ADVANCED SETUP” on page 41.
Figure 2.0 Initial startup screens
*The system may perform "Time Trimming" at startup. This is a normal function that the system uses to correct its internal clock.
Figure 2.1 Passwords