30
Using the Main Menu
RECORD PROGRAM (cont’d.)
To edit a program:
1. Under REC PROGRAM, press the
buttons to select
PROGRAM0~9
.
2. Press the
buttons to
select program options; press the
buttons to change the value of the
following options for each channel:
•
IMAGE SIZE
: Set the actual resolution for
each camera: 360x240, 720x240, and
720x480.
•
NORMAL
: Set the images (frames) per
second (IPS) for normal continuous
recording. Set from 0, 1, 2, 4, 5, 6, 8, 10,
15, and 30, from a shared pool of
frames-per-second. Total IPS depends on
your DVR model and resolution. The total
IPS cannot exceed the total IPS on the
system.
•
EVENT
: Set the frames per second (FPS)
for event recording (motion detection,
alarm, video loss). Set from 0, 1, 2, 4, 5,
6, 8, 10, 15, and 30, from a shared pool of
frames-per-second. Total IPS depends on
your DVR model and resolution. The total
IPS cannot exceed the total IPS on the
system.
•
CH-SUM
: Displays the total amount of
frames available on the system
(non-selectable).
•
QUALITY
: Set the recording quality for
each channel for Normal and Event
recording. The left column is for Normal
recording, the right column is for Event
recording: L (low), Normal), Fine), Beast).
•
PRE/POST
: Set the Pre-Recording and
Post-Recording times. Pre-Recording is
the length of time the system records
before an event (0~5 seconds);
Post-Recording is the length of time the
system records after an event (0~60
seconds). The left column is for
Pre-Recording, the right column is for
Post-Recording.
NOTE:
Pre-Recording can only be set for
all
channels; Post-Recording can be set for
individual channels.
•
EVENT TYPE
: Set the trigger for Event
recording for each channel:
A
(Alarm),
L
(video loss),
M
(motion detection), or
-
(no
event type).
3. Press the
button on the remote
control until you see the Save/Exit screen.
Select
SAVE ONLY
or
SAVE AND EXIT
to save your settings.
NOTE:
If you have 0 frames in either the
normal or Event columns, you will receive
a warning message from the system:
Figure 10.2 Record Program menu
CAUTION: EXIST 0 FRAMES IN GROUP A.
