34
Using the Main Menu
Mirror
With your Backup Mode set to Mirror, the
system will write data to its internal hard disk
and a connected external USB hard drive (not
included) simultaneously.
NOTE:
Make sure you have connected an
external USB hard drive to either of the USB
ports on the rear panel of the system prior
to enabling the disk mirror function.
To enable disk mirroring:
1. Select
BACKUP MODE
.
2. Press the
buttons and select
MIRROR
.
3. Press the
button on the remote
control until you see the Save/Exit screen.
Select
SAVE ONLY
or
SAVE AND EXIT
to save your settings.
For details on disk mirroring, see “Appendix K:
Using Disk Mirroring” on page 123.
ATTENTION
: You
must
have Overwrite
enabled on the system in order to use disk
mirroring. The connected external USB
hard drive
must be of equal or larger
capacity
than the internal hard drive of
the system.
Figure 10.9 Backup Mode: Mirror