111
APPENDIX D: CONNECTING PTZ CAMERAS
PTZ cameras (not included with this system) can be connected to the PTZ Control Block on the
rear panel of the system. The PTZ Controls are enabled through the Menu system on the DVR.
To install a PTZ (RS-485 Type) camera:
1. Connect the
Transmit Cable
to the
TA port
on the 485 port on the rear panel of the DVR.
2. Connect the
Receive Cable
to the
TB port
on the 485 port on the rear panel of the DVR.
3. Connect the camera to
BNC Channel 1
on the octopus cable.
4. Configure PTZ Menu options. The PTZ Camera Settings will depend on the Type of Camera
- refer to the specific Camera Manual for your brand and model of PTZ Camera.
DVR
PTZ CAMERA
(Not Included)
OCTOPUS CABLE
(BNC)
