24
Using the Main Menu
SCREEN
Open the Screen Menu to configure the following options:
• AUTO SEQUENCE
• DISPLAY
• TITLE
• COVERT
• SPOT
• CAMERA
AUTO SEQUENCE
Change the dwell times for both split-screen
Auto Sequence and single channel
(full-screen) Auto Sequence modes.
To turn pages:
Remote Control
Press the
buttons.
Mouse:
Click
WX
at the bottom of the screen.
•
A
UTO-SPLIT
: Set the dwell time for each
split-screen display while in Auto
Sequence mode. Select the view and
press he
buttons to increase/decrease
the value. Set from 0~60 seconds (by
default, 3 seconds).
ADD AUTO SINGLE
: Enable/disable
single channels from Auto Sequence
mode. If set to OFF (default), all single
(full-screen) channels will be skipped
while in Auto Sequence mode.
•
AUTO-SINGL
E
: Set the dwell time for each
single channel (full-screen) while in Auto
Sequence mode. Select the view and
press the
buttons to increase/
decrease the value. Set from 0~60
seconds (by default, 3 seconds).
VIDEO LOSS SKIP
: Enable/disable
skipping video loss channels from Auto
Sequence mode. If set to ON (default),
all Video Loss channels will be skipped
while in Auto Sequence mode.
Press the
button on the remote control
until you see the Exit screen. Select
SAVE
ONLY
or
SAVE AND EXIT
to save your
settings.
Figure 9.0 Auto-Split options
Figure 9.1 Auto-Single options