Danfoss VLT MSD 510, Руководство по эксплуатации

Страница: 18 / 246

2 Safety
2.1 Safety Symbols
The following symbols are used in this guide:
WARNING
Indicates a potentially hazardous situation that could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation that could result in minor or moderate injury. It can also be used to alert against
unsafe practices.
NOTICE
Indicates important information, including situations that can result in damage to equipment or property.
2.2 Safety Instructions and Precautions
Compliance with the safety instructions and precautions is necessary at all times.
• Orderly and proper transport, storage, fitting, and installation, as well as careful operation and maintenance, are essential for the
trouble-free and safe operation of the servo system and its components.
• Only suitably trained and qualified personnel may work on the MSD 510 system and its components or in its vicinity.
• Only use accessories and spare parts approved by Danfoss.
• Comply with the specified ambient conditions.
• The information in this manual about the use of available components is provided solely by way of examples of applications and
suggestions.
• The plant engineer or system engineer is personally responsible for checking the suitability of the supplied components and the
information provided in this manual for the specific application concerned:
-
For compliance with the safety regulations and standards relevant to the specific application.
- For implementing the necessary measures, changes, and extensions.
• Commissioning the servo system or its components is not allowed until it has been ascertained that the machine, system, or plant
in which they are installed conforms to the statutory provisions, safety regulations, and standards that apply to the application in
the country of use.
• Operation is only allowed in compliance with the national EMC regulations for the application concerned.
• Compliance with the limit values specified by national regulations is the responsibility of the producer of the plant, system, or
machine.
• Compliance with the specifications, connection conditions, and installation conditions in this manual is mandatory.
• The safety regulations and safety provisions of the country in which the equipment is used must be observed.
• To protect the user against electrical shock and to protect the servo system against overload, protective grounding is obligatory
and must be performed in accordance with local and national regulations.
Safety
Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
AQ262450196490en-000101 / 175R1170
18 | Danfoss A/S © 2019.10