6.11.9.2 Version V4.x
Procedure
1. Select the menu entry [Tools
→
Import Fieldbus Device...].
2. Select the XDD file (for example,
0x0300008D_ISD510_S.xdd
or
0x0300008D_ISD510_A.xdd
) from its location on the hard drive. The
device is then known to Automation Studio™.
3. Now add the SDM 511/SDM 512 drive module or servo drive to the Ethernet POWERLINK
®
interface of the controller in the
Physical
View
:
Select the menu entry [Open
→
System Designer] to show the
System Designer
.
To add a hardware module to the
Physical View
or
System Designer
, select the servo drive in the group
POWERLINK
in the
Hardware
Catalog
toolbox.
Drag the selected module to the desired position to connect it to the selected hardware module, network interface, or slot.
To change the node number, right-click on the device and select [Node Number
→
Change Node Number].
e3
0b
h5
14
.1
0
Illustration 65: Adding a Servo Drive to the Project in V4.x
6.11.10 Importing PSM 510, DAM 510 and ACM 510 into Automation Studio™
Context:
NOTICE
-
For each physical Power Supply Module (PSM 510), Decentral Access Module (DAM 510), and Auxiliary Capacitors Module
(ACM 510), add 1 entry to the
Physical View
of Automation Studio™.
Commissioning
Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
AQ262450196490en-000101 / 175R1170| 93
Danfoss A/S © 2019.10
Содержание VLT MSD 510
Страница 1: ...Operating Guide VLT Multiaxis Servo Drive MSD 510 System...
Страница 2: ......
