Danfoss VLT MSD 510, Руководство по эксплуатации

Страница: 221 / 246

Pins Description Notes Rating/parameter
4 DigOut1 Digital output Nominal voltage: 24 V ±20%
Maximum current: 150 mA
(1)
Maximum switching frequency: 100 Hz
5 DigOut2
6 DigOut3
7 DigIn4 Digital input
Digital input:
Galvanic isolated
High (logic "1") voltage: 10–30 V DC
Low (logic "0") voltage: <5 V DC
Nominal voltage: 0–24 V
Maximum current: 3 mA
Input resistance: 10 kΩ
Maximum switching frequency: 100 Hz
8 DigIn3
9 DigIn2 Analog/digital input
Digital input:
Nominal voltage: 0–24 V
Bandwidth:
≦
100 kHz
Analog input:
Nominal voltage: 0–10 V
Input impedance: 5.46 kΩ
Bandwidth:
≦
25 kHz
10 DigIn1
1
Maximum output current for all 4 digital outputs together. If all 4 digital outputs are used, the maximum output current of each is 30 mA.
The conductor cross-section range is 0.2–1.5 mm
2
(AWG 24–AWG 16).
NOTICE
-
Only PELV potential can be connected to the digital inputs and outputs.
11.7.5 UAUX Connector
The U
AUX
connector is located on the Power Supply Module (PSM 510).
Specifications
Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
AQ262450196490en-000101 / 175R1170| 221
Danfoss A/S © 2019.10