manualshive.com logo in svg

Danfoss VLT MSD 510, Руководство по эксплуатации

Поделиться
Скачать
Danfoss VLT MSD 510 Скачать руководство пользователя страница 241

VLT Servo Drive Systems Glossary

A

A-flange

The A side is the shaft side of the servomotor.

ACM

Auxiliary Capacitors Module.

Ambient temperature

The temperature in the immediate vicinity of the servo system or compo-
nent.

Automation Studio™

Automation Studio is a registered trademark of B&R. It is the integrated
software development environment for B&R controllers.

B

Bearings

The ball bearings of the servomotor.

Beckhoff

®

Beckhoff is a registered trademark of and licensed by Beckhoff Automation
GmbH, Germany.

B&R

Multi-national company, specializing in factory and process automation
software and systems for a wide range of industrial applications.

B side

The rear side of the servo drive with the plug-and-socket connectors.

Brake

Mechanical holding brake on the servo drive.

C

CANopen

®

CANopen is a registered community trademark of CAN in Automation e.V.

CE

European test and certification mark.

CIA DS 402

Device profile for drives and motion control. CIA is a registered community
trademark of CAN in Automation e.V.

Connector (M23)

Servo drive hybrid connector.

Cooling

Decentral servo drives are cooled by natural convection (without fans). The
Servo Drive Modules SDM 511/SDM 512 and all system modules except the
ACM 510 are cooled by an internal fan.

D

DAM

Decentral Access Module

DC-link

Each servo drive has its own DC-link, consisting of capacitors.

DC-link voltage

A DC voltage shared by several servo drives connected in parallel.

DC voltage

A direct constant voltage.

DSD

Decentral Servo Drive

E

EPSG

Ethernet POWERLINK Standardization Group.

ETG

EtherCAT Technology Group

EtherCAT

®

EtherCAT (Ethernet for Control Automation Technology) is an open high-
performance Ethernet-based fieldbus system. EtherCAT is registered trade-

VLT Servo Drive Systems Glossary

Operating Guide  | VLT® Multiaxis Servo Drive MSD 510 System

AQ262450196490en-000101 / 175R1170| 241

Danfoss A/S © 2019.10

Содержание VLT MSD 510























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды