Danfoss VLT MSD 510, Руководство по эксплуатации

Страница: 73 / 246

5.10 Connecting the Decentral Access Module (DAM 510)
5.10.1 Connecting the Cables on the Top of the Decentral Access Module DAM 510
Context:
1 2
3 4 5
e
3
0
b
g
4
6
7
.1
0
1 Ethernet connector IN (X1 IN)
3 STO connector IN (STO DAM)
5 External encoder connector (E DAM)
2 Ethernet connector OUT (X3 OUT)
4 STO connector OUT (STO DAM)
Illustration 52: Connectors on the Top of DAM 510
Procedure
1. Connect the Ethernet cable from the output of the previous module to the input connector [1].
2. Insert the wires from the STO output of the previous module into the 24 V IN (STO input) connector, see
11.7.10.3.1 STO Connectors
on the Top of DAM 510 .
3. Insert the 24 V IN (STO connector IN) connector [3] into the DAM 510.
4. If required, connect the external encoder connector [5].
5.10.2 Connecting the Feed-In Cable
Context:
1 2 3 4
e
3
0
b
g
4
6
8
.1
0
1 Ethernet connector
3 STO out connector
2 AUX connector
4 UDC connector
Illustration 53: Connectors on the Bottom of DAM 510
Electrical Installation
Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
AQ262450196490en-000101 / 175R1170| 73
Danfoss A/S © 2019.10