6.16 VLT® Servo Toolbox Software
6.16.1 Overview
The VLT
®
Servo Toolbox is a standalone PC software designed by Danfoss. It is used for parameterization and diagnostics of the system
modules. It is also possible to operate the devices in a non-productive environment.
The VLT
®
Servo Toolbox contains several subtools, which provide various functionalities.
Table 20: Important Subtools
Subtool
Description
Scope
For visualization of the tracing functionality of the servo drives, the Power Supply Module (PSM 510),
the Decentral Access Module (DAM 510), and the Auxiliary Capacitors Module (ACM 510).
Parameter list
For reading/writing parameters.
Firmware update
For updating the firmware on the devices.
Drive control
For operating the servo drives for testing purposes.
PSM control
For operating the Power Supply Module (PSM 510) for testing purposes.
DAM control
For operating the Decentral Access Module (DAM 510) for testing purposes.
ACM control
For operating the Auxiliary Capacitors Module (ACM 510) for testing purposes.
CAM editor
For designing CAM profiles for the servo drives.
Configuration parameter
For setting up the motor and feedback parameters, and PID settings.
Drive commissioning
For motor feedback adjustment and inertia measurement.
The detailed description of the VLT
®
Servo Toolbox functionality and the full parameter lists can be found in the VLT
®
Servo Drive
System ISD 510, DSD 510, MSD 510 Programming Guide.
6.16.2 System Requirements
To install the VLT
®
Servo Toolbox software, the PC must meet the following requirements:
•
Supported hardware platforms: 32.bit, 64-bit.
•
Supported operating systems: Windows 7, Windows 8.1, Windows 10.
•
.NET framework version: 4.7.
•
Minimum hardware requirements: 512 MB RAM, Intel Pentium 4 with 2.6 GHz or equivalent, 20 MB hard disk space.
•
Recommended hardware requirements: Minimum 1 GB RAM, Intel Core i5/i7 or compatible.
6.16.3 Installing the VLT® Servo Toolbox Software
Context:
Administrator rights are required to install the software with the Windows operating system. If necessary, contact your system
administrator.
Commissioning
Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
AQ262450196490en-000101 / 175R1170
134 | Danfoss A/S © 2019.10
Содержание VLT MSD 510
Страница 1: ...Operating Guide VLT Multiaxis Servo Drive MSD 510 System...
Страница 2: ......
