Danfoss VLT MSD 510, Руководство по эксплуатации

Страница: 48 / 246

4 Mechanical Installation
4.1 Items Supplied
Depending on the application, the items supplied for the MSD 510 system are:
• VLT
®
Power Supply Module (PSM 510)
• VLT
®
Single axis Servo Drive Module (SDM 511)
• VLT
®
Double axis Servo Drive Module (SDM 512)
• VLT
®
Decentral Access Module (DAM 510)
• VLT
®
Auxiliary Capacitors Module (ACM 510)
• VLT
®
Expansion Module (EXM 510)
• AC choke
• This operating guide
• Feed-in (hybrid) cable
• Loop (hybrid) cable
NOTICE
-
The hybrid feed-in and loop cables are required when ISD510/DSD510 servo drives are used in the servo system.
The packaging unit depends on the number of modules delivered. Save the packaging for use in the event of product return.
4.2 Transport
• Always use means of transport and lifting gear with sufficient load capacity to transport the servo system components.
• Avoid vibration during transport.
• Avoid heavy impacts and blows.
4.3 Inspection on Receipt
Procedure
1. After receiving the delivery, immediately check whether the items supplied match the shipping documents. Danfoss does not
honor claims for faults registered later.
2. Register a complaint immediately with the carrier if there is visible transport damage.
3. Register a complaint immediately with the responsible Danfoss representative if there are visible defects or the delivery is
incomplete.
4.4 Safety Measures during Installation
Always observe the safety instructions in this manual during installation. Pay particular attention to ensuring that the following points
are always observed:
Mechanical Installation
Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
AQ262450196490en-000101 / 175R1170
48 | Danfoss A/S © 2019.10