Daikin RXL25G2V1B, Руководство по обслуживанию

Страница: 80 / 294

Operation Manual SiENBE04-925_A
66 Operation Manual
NOTE
8. Press “SELECT button” to select the
desired temperature.
• The temperature can be set between
10°C and 32°C.
Cooling: The unit operates at 18°C even
if it is set at 10 to 17°C.
Heating: The unit operates at 30°C even
if it is set at 31 to 32°C.
• To return to the time setting, press
“BACK button”.
• The set temperature is only displayed
when the mode setting is on.
9. Press “NEXT button”.
• The temperature will be set and go to
the next reservation setting.
• To continue further settings, repeat
the procedure from STEP
4 .
10. Press “ button” to complete the
setting.
• Be sure to direct the remote control
toward the indoor unit and check for a
receiving tone and flashing the operation
lamp.
• “ ” is displayed on the LCD and
WEEKLY TIMER operation is activated.
• The TIMER lamp lights up.
• A reservation made once can be easily
copied and the same settings used for
another day of the week.
Refer to Copy mode.
„
Notes on WEEKLY TIMER operation
• Do not forget to set the clock on the remote control first.
• The day of the week, ON/OFF TIMER mode, time and set temperature (only for ON TIMER mode) can be set
with WEEKLY TIMER. Other settings for ON TIMER are based on the settings just before the operation.
• Both WEEKLY TIMER and ON/OFF TIMER operation cannot be used at the same time. The ON/OFF TIMER
operation has priority if it is set while WEEKLY TIMER is still active. The WEEKLY TIMER will go into standby
state, and “
” will disappear from the LCD.
When ON/OFF TIMER is up, the WEEKLY TIMER will automatically become active.
• Only the time and set temperature set with the weekly timer are sent with the “ button”. Set the weekly
timer only after setting the operation mode, the fan strength, and the fan direction ahead of time.
• Shutting the breaker off, power failure, and other similar events will render operation of the indoor unit’s internal
clock inaccurate. Reset the clock.
• The “BACK button” can be used only for the time and temperature settings. It cannot be used to go back to the
reservation number.
1, 2
SIENBE04-925_A_FRONT.pdf 80 24/02/2011 13:53:55