![Daikin RXL25G2V1B Скачать руководство пользователя страница 76](http://html.mh-extra.com/html/daikin/rxl25g2v1b/rxl25g2v1b_service-manual_501970076.webp)
Operation Manual
SiENBE04-925_A
62
Operation Manual
2.8
TIMER Operation
NOTE
Timer functions are useful for automatically switching the air conditioner on or off at
night or in the morning. You can also use OFF TIMER and ON TIMER in combination.
To use OFF TIMER operation
•
Check that the clock is correct.
If not, set the clock to the present time.
1. Press “OFF TIMER button”.
•
“
0:00
” is displayed on the LCD.
•
“
OFF
” blinks.
2. Press “SELECT button” until the time setting
reaches the point you like.
•
Every pressing of either button increases or
decreases the time setting by 10 minutes.
Holding down either button changes the
setting rapidly.
3. Press “OFF TIMER button” again.
•
The TIMER lamp lights up..
To cancel the OFF TIMER operation
4. Press “CANCEL button”.
•
The TIMER lamp goes off
•
When TIMER is set, the present time is not displayed.
•
Once you set ON, OFF TIMER, the time setting is kept in the memory. (The memory is canceled when remote control
batteries are replaced.)
•
When operating the unit via the ON/OFF Timer, the actual length of operation may vary from the time entered by the
user. (Maximum approx. 10 minutes)
NIGHT SET mode
When the OFF TIMER is set, the air conditioner automatically adjusts the temperature setting (0.5°C up in COOL, 2.0°C
down in HEAT) to prevent excessive cooling (heating) for your pleasant sleep.
1, 3
4
2
SIENBE04-925_A_FRONT.pdf 76
24/02/2011 13:53:54
Содержание RXL25G2V1B
