Daikin RMXS-L Series, Руководство по обслуживанию

Страница: 141 / 250

SiUS181305E FFQ09/12/15/18LVJU
Remote Controller 132
1. Operation mode
2. Fan Speed
3. Setpoint display
STANDBY
5. Message
6. Ventilation
7. display

Displayed when the key lock is set.
8. display
9. Under Centralized control
(VRV only)
10.Changeover controlled by the
master indoor unit

Displayed when another indoor unit on the
system has the authority to change the
operation mode between cool and heat.

Displayed if the system is under the
management of a multi-zone controller
(option) and the operation of the system
through the remote controller is limited.
 Displayed if the Schedule or Off timer is
enabled.
 Displayed when a energy recovery
ventilator is connected.

Ventilation Mode icon. ( )
These icons indicate the current ventilation
mode (ERV only) (AUTO, ERV, BYPASS).

Air Purify ICON ( )
This icon indicates that the air purifying unit
(option) in operation.
Error: Push Menu button
Warning: Push Menu button

Displayed if an error or warning is detected.
Time to clean filter
Time to clean element
Time to clean filter & element
 Displayed as a reminder when it is time to
clean the filter or element.

Displayed for a few seconds when an
Operation button is pressed and the indoor
unit does not provide the corresponding
function.

In a remote control group, the message will
not be displayed if at least one of the indoor
units provides the corresponding function.
If ventilation icon is displayed in this field:
 Indicates that an energy recovery ventilator
is connected.
For details, refer to the Operation Manual
of the ERV.
4. Stand by for Defrost/Hot start
 Used to display the setpoint for the indoor
unit.

Use the Celsius/Fahrenheit item in the
main menu to select the temperature unit
(Celsius or Fahrenheit).

Used to display the fan speed that is set for
the indoor unit.
 The fan speed will not be displayed if the
connected model does not have fan speed
control functionality.

Used to display the current operation
mode: Cool, Heat, Vent, Fan, Dry or Auto.

In Auto mode, the actual operation mode
(Cool or Heat) will be also displayed.
 Operation mode cannot be changed when
OFF is displayed.
Operation mode can be changed after
starting operation.
MASTER
CONTROLLED
CENTRAL
CONTROL
ERV BYPASS AUTO
ERV
AIR
PURIFY
The following messages may be
displayed.
This function is not available