Cosmed Q-NRG Скачать руководство пользователя страница 48

Страница: 48 / 152

REF C04717-02-91 Q-NRG User Manual, Edition 4.2

Chapter 3 - Q-NRG Operation

COSMED srl

Utility

Export/Import/Erase

All tests can be exported to a USB flash drive for back-up purpose. In the same way, tests in the archive, previously
exported to a USB flash drive, can be reimported into Q-NRG.

Note:

Q-NRG is compatible with “FAT32” formatted USB flash drives ONLY (32 GB Max storage size).

To Export a Database to a USB flash drive

1. Insert the USB flash drive into an available USB Port on the left side of Q-NRG.
2. Select

Utility/Export test

To Import Database from a USB flash drive

1. Insert the USB flash drive into an available USB Port on the left side of Q-NRG.
2. Select

Utility/Import test.

3. In case different database files are found, it is possible to select the one to be imported.

WARNING:

All test stored in the Q-NRG memory will be overwritten!

To Erase Database

•

Select

Utility/Erase DB

WARNING:

All test stored in Q-NRG memory will be deleted!

Содержание Q-NRG

























































































































































Результаты поиска

Содержание Q-NRG

Отзывы:

Cosmed Q-NRG, Руководство пользователя, Страница: 48 / 152

Результаты поиска

Содержание Q-NRG

Отзывы: