manualshive.com logo in svg

Buffalo TeraStation 5010, Руководство пользователя, Страница: 70 / 176

Поделиться
Скачать
Buffalo TeraStation 5010 Скачать руководство пользователя страница 70

69

Type

Files included

Normal backup

All files in the source will be backed up to the destination. You can specify 
how many backup versions to keep from 1–400, or select "Unlimited" to keep 
all backups until the drive is full. If a specific number of backup versions is 
specified, the backup destination folder should be on the same TeraStation 
that the backup job is configured from, or on an external USB drive attached 
to that TeraStation.

Overwrite (incremental)

The first time the backup job runs like a normal backup. In subsequent 
backups, files added to the source as well as files deleted from the source are 
kept in the backup folder.

Overwrite (differential)

The first backup job runs like a normal backup. As each additional backup 
job runs, files are added to and deleted from the backup folder. The backup 
destination folder is always the same size as the backup source folder.

Management backup

Each time a backup is executed, management information is stored, and 
only files that have changed are copied or deleted. Data is retrieved from the 
previous backup file for files that were not changed. This is useful for making 
backups with limited space or for referencing status at a particular point in 
time (for use for data snapshot applications). The destination folder for a 
management backup should be a local folder on this TeraStation or on a USB 
drive attached to it. The destination folder will be set to read-only. Do not use 
folders from drives formatted with FAT.
You can specify how many backup versions to keep from 1–400, or select 
"Unlimited" to keep all backups until the drive is full. The backup destination 
folder should be on the same TeraStation that the backup job is configured 
from, or on an external USB drive attached to that TeraStation.

5 

Click 

Add

.

6 

Click 

Browse

 under "Backup Source Folder Name".

7 

Select the shared folder that will be the backup source, then click 

OK

.

8 

Click 

Browse

 under "Backup Destination Folder Name".

Содержание TeraStation 5010

















































































































































































Отзывы:

Нет отзывов