Buffalo TeraStation 5010 Скачать руководство пользователя страница 147

Страница: 147 / 176

Chapter 8 Replacing Drives

LEDs

Drives in the TeraStation show a green status LED during normal operation. If a drive fails, its error LED will glow red.

Error LED
Glows red if a drive has failed.

Status LEDs
The failed drive's status LED will be glowing a steady red. A drive with a red status LED is ready to hot-swap.

Notes:

• Do not unplug a drive whose status LED is green instead of red. Dismount it first or shut down the TeraStation

before swapping a working drive. If you remove the drive without properly dismounting it, data may be lost
or the TeraStation may malfunction.

• For the replacement drive, use a Buffalo OP-HDN series drive. The new drive should be the same size or larger.

If a larger drive is used, the extra space will not be usable in a RAID array.

• To avoid damaging the TeraStation with static electricity, ground yourself by touching something made of

metal before handling any sensitive electronic parts.

• After a drive is replaced, it will take about 30 minutes before normal file reading and writing are restored.

Settings may not be accessible during this period.

• Do not change the order of the drives in the TeraStation. For example, pulling out drive 1 and replacing it

with drive 2 may cause data to be corrupted or lost.

• If the LCD panel does not change after a new drive is installed, click

Rediscover Drive

in Settings.

146

Содержание TeraStation 5010

















































































































































































Результаты поиска

Содержание TeraStation 5010

Отзывы:

Похожие инструкции для TeraStation 5010

Бренды по названию

Популярные бренды

Buffalo TeraStation 5010, Руководство пользователя

Результаты поиска

Содержание TeraStation 5010

Отзывы:

Похожие инструкции для TeraStation 5010

Бренды по названию

Популярные бренды