Buffalo TeraStation 5010 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 176

Buffalo TeraStation 5010 Скачать руководство пользователя страница 36

Chapter 4 Managing Storage

RAID Modes

TeraStations support many types of RAID. The type of RAID arrays available for use depends on how many drives are
installed in your TeraStation.

TeraStation

Default RAID Mode

Available Modes

TS5410DN, TS5410RN

RAID 5

RAID 5, 6, 10, 1, 0, and JBOD

TS5210DN

RAID 1

RAID 1, 0, and JBOD

Notes:

• If you change the RAID mode, all data on the array is deleted. This is true for every procedure in this chapter.

Always back up any important data before performing actions that affect your RAID array.

• Drive capacity is shown in Settings in actual gigabytes. The Properties window in Windows may show GiB

instead, which will be a smaller number.

• If the TeraStation is restarted or shut down while changing the RAID mode, the message displayed on the

LCD panel will change from I46 or I47 to I18.

• RAID 5, 6, and 10 are only available for 4-drive models.

RAID 6

RAID 6 arrays are available for TeraStations with 4 or more drives. RAID 6 combines 4 or more drives into a single
array. The usable space is equal to the sum of the capacity of all drives minus the capacity of two drives. For example,
if 4 drives are combined into a RAID 6 array, the usable space is the sum of the capacity of 2 drives. If 2 drives in the
array are damaged, you can recover data by replacing them. If 3 or more drives are damaged, your data is lost.

RAID 5

RAID 5 arrays are available for TeraStations with 3 or more drives. RAID 5 combines 3 or more drives into a single
array. The usable space is equal to the sum of the capacity of the drives minus the capacity of one drive. For
example, if 4 drives are combined into a RAID 5 array, the usable space is the sum of 3 drives. If one drive in the array
is damaged, you can recover data by replacing the damaged drive. If two or more drives are damaged at the same
time, your data is lost.

RAID 10

RAID 10 arrays are available for TeraStations with 4 or more drives. In this mode, mirrored pairs of drives in RAID 1
arrays are combined into a RAID 0 array. The usable space is equal to the capacity of the smallest drive multiplied by
the number of drives divided by 2.

35

«
...
34
35
36
37
38
...
»

Содержание TeraStation 5010

















































































































































































Отзывы:

Нет отзывов