manualshive.com logo in svg

Buffalo TeraStation 5010, Руководство пользователя, Страница: 132 / 176

Поделиться
Скачать
Buffalo TeraStation 5010 Скачать руководство пользователя страница 132

131

Click 

Use Local Date/Time

 to use your computer's time settings for the TeraStation.

By default, the TeraStation adjusts its clock automatically by using a default NTP server. This NTP server belongs 
to Internet Multi Feed Inc. For more information, visit http://www.jst.mfeed.ad.jp.
To use a different NTP server, select 

Name/Time/Language

 from 

Management

. Click 

Time

, then 

Edit

. Clear the 

"Use Default NTP Server" checkbox and enter a new NTP IP address. Click 

OK

.

If an NTP server is specified by name instead of IP address, make sure that a DNS server is configured for the 
TeraStation.

Note: 

The internal clocks of the TeraStation and other devices on your network may run at slightly different 

speeds. Over a long period of time your network devices may show somewhat different times, which can cause 
network problems. If clocks on your network vary by more than 5 minutes it may cause unexpected behavior. 
For best results, keep all clocks on the network set to the same time by adjusting them regularly, or use an NTP 
server to correct them all automatically.

Содержание TeraStation 5010

















































































































































































Отзывы:

Нет отзывов