Belden GRASS VALLEY KALEIDO-MX 1RU, Инструкция по установке и обслуживанию

Страница: 56 / 164

56
Frame Control Panel Operation and IP Network Setup
Setting the Multiviewer’s IP addresses
5 Complete your Kaleido-MX system configuration by changing the system name, if
desired. See Setting the System Name on page 108.
You are now ready to open XAdmin and XEdit, from a client PC or laptop within the
same subnet, and verify your system communication status (see
Multiviewer Model
Representation in XEdit and XAdmin , on page 67, and System Verification , on
page 125).
Note:
If there are more than one multiviewer in the same network
environment, it is important to assign each a unique system name, so that
you can tell them apart (for example, when using a remote control panel
such as the Kaleido-RCP2 or RCP-200).