130
Maintenance & Troubleshooting
Verifying the Multiviewer’s IP Addresses and Application Version
5 If the card is identified as KMX-OUTA on the display, then press the [–] button
repeatedly until OUTPUT A IP EDIT appears. If the card is identified as KMX-OUTB, then
press the [–] button until OUTPUT B IP EDIT appears.
6 Press the SEL button.
The current IP address for this card appears on the display.
7 Press the Select button
on the front edge of the output card
to exit the control menu.
Verifying an Input Card’s Application Version
To verify the application version on an input card
1 Press the Select button on the front edge of the Kaleido-MX
input
card. See
IN Front Card-edge Description
, on page 29. The Status LED on the selected card
flashes orange, and the associated control menu appears on the display of the Densité
frame’s local control panel.
2 On the local control panel, press the [–] button.
The version of the Kaleido Software that is running on the card (e.g. “8.40-build.987”)
appears on the display.
3 Press the Select button
on the front edge of the input card
to exit the control menu.
Note:
If you have a single- or dual-head Kaleido-MX multiviewer, then this
IP address doubles as the system IP address.
