49
Kaleido-MX (1RU)
Installation & Service Manual
Local Control Panel Menu Structure
Where applicable, default values are underlined.
* All output cards within a Kaleido-MX frame must have their output heads configured with the same refresh
rate. If your frame is referenced, then the heads’ refresh rate must also match the reference signal's refresh
rate.
** Parameters shown here in braces { } will display the actual value of the item and not the text shown above.
Kaleido-MX output card local menu
STATUS
{CARD STATUS}**
{CARD VERSION}**
RESOLUTION
HEAD1
{List of resolutions;* = current}**
HEAD2
{List of resolutions;* = current}**
{LINK STATE}**
FANS
{CPU FAN STATUS}**
{FPGA FAN STATUS}**
NETWORK SETTINGS
FRAME IP ADDRESS EDIT
###.###.###.###
NETMASK EDIT
###.###.###.###
DEFAULT GW EDIT
###.###.###.###
LINK MODE EDIT
Auto-negotiate
100Mbps half-duplex
100Mbps full-duplex
OUTPUT A IP EDIT
###.###.###.###
OUTPUT B IP EDIT
###.###.###.###
{POSITION}**
{MAC ADDRESS}**
