40
Multiviewer Cabling
Signal Connections to the Multiviewer
Signal Connections to the Multiviewer
This section describes the connectors found on the Kaleido-MX (1RU) models’ rear panels.
Output Modules
Output module connectors on Kaleido-MX (1RU) 8 × 2, 8 × 1, 16 × 2, or 16 × 1
Output module connectors on Kaleido-MX (1RU) 24 × 2, or 24 × 1
The following table lists the function of each connector associated with the output heads.
Connector label
Connector
type
Function
Head 1
Head 2
MV OUT 1
MV OUT 2
HDMI
High definition connection for the
multiviewer output, which carries audio
and video, and can support resolutions up
to 1920 × 1200 (all progressive scan)
SDI OUT 1
SDI OUT 2
DIN 1.0/2.3
Serial digital HD output signal for
monitoring purposes
ANALOG OUT 1 L ANALOG OUT 2 L WECO
Analog audio output (left channel) to feed
the audio monitoring system
ANALOG OUT 1 R ANALOG OUT 2 R WECO
Analog audio output (right channel) to
feed the audio monitoring system
SFP 1
SFP 2
—
Optional ports.
Not yet supported.
FLEXBRIDGE IN 1 FLEXBRIDGE IN 2 DIN 1.0/2.3
Reserved for future expansion
