53
Kaleido-MX (1RU)
Installation & Service Manual
Enabling EDID Auto-Detection from the Monitor Wall
To enable EDID auto-detect for a display
1 Right-click the monitor wall background, and then click
Display Resolution
on the
menu.
2 Select the
Use detected monitor resolution
check box.
3 Click
OK
.
• If you changed a parameter from the card’s control menu, but have not
applied your change (you did not press the SEL button on the local control
panel), once the 30-second timeout has occurred, the parameters will be
confirmed as if you had pressed the SEL button.
Notes
(continued)
Notes
• The monitor EDID auto-detection feature is enabled by default in order to
facilitate the initial setup of a Kaleido Software system. Setting an output
head to a specific resolution, from a multiviewer service panel in iControl
(if available), or from a Densité controller’s local control panel disables the
EDID auto-detection for this head.
