65
Kaleido-MX (1RU)
Installation & Service Manual
Between multiviewer and SNMP managers
Between multiviewer and NTP server
The following ports, used for communications to/from Network Time Protocol servers, are
open by default on all Kaleido Multiviewer systems:
Driver
Port
Transport
Notes
ETL
4000
TCP
GVG 7000 Native
12345
TCP
NVEP NV9000 (NP0017)
9193
TCP
VikinX Modular
4381
TCP
Quintech
9100
TCP
Sony HKSPC
12345
TCP
GVGNP Emulator
Utah RCP-3
5001
TCP
SC-4 Ethernet
SAM (Snell/Pro-Bel) SW-P-02
2000
TCP
SAM (Snell/Pro-Bel) SW-P-08
14000
TCP
Note:
This is configurable in XEdit—you can choose any UDP or TCP/IP port
to use for communications between the multiviewer and an external router.
Port
Used for
Transport Notes
161
SNMP
UDP
Used for SNMP (Simple Network Management Protocol)
communications between external SNMP managers and a
multiviewer (e.g., sending get, get-next, and set messages
to a multiviewer’s SNMP agent, and receiving the response).
1161
UDP
Used for SNMP (Simple Network Management Protocol)
communications between external SNMP managers and a
Kaleido-IP
multiviewer (e.g., sending get, get-next, and set
messages to a multiviewer’s SNMP agent, and receiving the
response).
Port
Used for
Transport Notes
123
NTP
TCP
Used for Network Time Protocol synchronization. Port
needs to be open in both directions.
