101
Kaleido-MX (1RU)
Installation & Service Manual
Remote Control Using iControl
The Kaleido-MX may be controlled by using Grass Valley’s iControl version 4.43 or later. This
section describes the two control panels associated with the Kaleido-MX’s input and output
cards and their use. Refer to the iControl User’s Guide for information about setting up and
operating iControl. See
In iControl Navigator, iControl Web, or iControl Solo, double-click the icon for a Kaleido-MX
input or output card (KMX-3901-OUT, KMX-3901-IN-8-D, KMX-3901-IN-16-D, or KMX-3901-
IN-16-Q) to open the associated control panel.
Kaleido-MX Service Control Panels in iControl
The card label (
KMX-IN-16-D,
and
KMX-OUT
in the examples below) and the slot number
where the card is installed in the Densité frame are indicated in the window’s title bar.
The service control panel for Kaleido-MX input cards only offers information.
Service control panel for a Kaleido-MX input card
on page 106 for more information.
