33
Kaleido-MX (1RU)
Installation & Service Manual
If the Status LED is steady red (not flashing), use the Densité frame control panel to review
card status information (see
Local Control Panel Menu Structure
, on page 49). If the card
status menu reports that an update is in progress, then you know that you should not
interrupt this process (by reseating the card, for example).
Output card power LED
Monitors the status of the power supplies on board the Kaleido-MX card.
Output card heartbeat LED
Monitors the status of the system firmware.
Memory card access LED
Monitors read/write operations to the SD memory card.
ETH communication LED
This LED is always OFF, and currently not relevant.
CPU 0 LED (not used)
This LED is always orange, and currently not relevant.
CPU 1 LED
Monitors the status of the firmware during the startup process.
Power LED Color
Meaning
Green
OK
OFF
Failure of an on-board PSU, or there was a glitch on the 3.3V PSU (in which
case reseating the card may resolve the problem). In the first case,
reseating the card will not resolve the problem.
Heartbeat LED
Color
Meaning
Flashing red
System OK (
heartbeat
signal)
Memory Card
Access LED Color
Meaning
OFF
No read/write operations in progress
Flashing green
Read of write operation in progress
CPU 1 LED Color
Meaning
Green
Normal (the Kaleido Software, XEdit, XAdmin are available)
Flashing orange
Firmware initialization completed (waiting for the Kaleido Software to
start)
