50
Frame Control Panel Operation and IP Network Setup
Enabling the CPU-ETH2 Automatic Restore Feature
** Parameters shown here in braces { } will display the actual value of the item and not the text shown above.
*** The Kaleido-MX does not support converting an input module into a 4K UHD prescaler. The SFP ports
are not yet supported.
Enabling the CPU-ETH2 Automatic Restore Feature
To enable the CPU-ETH2 automatic restore feature
1 On the Densité frame’s local control panel, press the CONTROLLER button. See
the Densité Frame Control Panel
2 Press the [–] button repeatedly until RESTORE POINTS appears on the display, and then
press the SEL button.
3 Press the [–] button repeatedly until DEFAULT ACTION appears on the display, and then
press the SEL button.
• If the control panel’s display shows UPDATE SETTINGS, then the automatic restore
feature is already enabled.
• If the control panel’s display shows KEEP SETTINGS, navigate to UPDATE SETTINGS
by pressing the [–] button, and then press the SEL button to apply your change.
4 Press the CONTROLLER button to exit the controller’s menu.
Kaleido-MX input card local menu
STATUS
CARD STATUS
{CARD STATUS}**
INPUT STATUS
1 {FORMAT}**
2 {FORMAT}**
3 {FORMAT}**
16 {FORMAT}**
CONFIG***
4K UHD PRESCALER
ENABLE
DISABLE
SFP CONFIG
SFP OUT 1
ON
OFF
SFP OUT 2
ON
OFF
SFP OUT 3
ON
OFF
SFP OUT 4
ON
OFF
FACTORY DEFAULT
RESTORE
{CARD VERSION}**
...
