103
Kaleido-MX (1RU)
Installation & Service Manual
Output Settings Panel
Set the resolution of the multiviewer output heads to an appropriate value based on the
displays in use. If a display uses EDID (Extended Display Identification Data) to
communicate its characteristics to the Kaleido-MX multiviewer via the HDMI connector, the
matching can be done automatically, in which case the detected resolution appears in the
Detected resolution
box. Select the check box to use the detected resolution. If the
detected resolution is not used (either because the check box is not selected or because the
display does not make the information available) the value selected in the
Output
resolution
list will be used.
