Belden GRASS VALLEY KALEIDO-MX 1RU, Инструкция по установке и обслуживанию

Страница: 108 / 164

108
System Configuration
Setting the System Name
Setting the System Name
Once you have configured the output cards from the local control panel, use XAdmin to
complete your system’s network setup.
To set your Kaleido-MX system name
1 Configure your client PC or laptop with an IP address in the same range as the
multiviewer’s current IP addresses if needed (see Configuring a PC to Configure an
ABT’s Network Settings , on page 119).
2 Open a Web browser window and enter the multiviewer’s system IP address in the
address bar (see Finding the System IP Address , on page 129, if needed).
3 The Kaleido Multiviewer’s home page appears.
4 Click the XAdmin button.
5 If you see a security warning, or a certificate error message, then see Registering your
Multiviewer's Security Credentials with your Browser , on page 81.
6 If the “Log in to XAdmin” page appears, type the password, and then click Log in .
7 Internet Explorer users: If a blank page appears, then see Enabling the Compatibility
View in Internet Explorer , on page 90.
The XAdmin Status and Options page appears.