5. Click on a line to add an inline anchor point.
a) Point to the ROI line; the pointer changes to a +.
Figure 85. Add Inline Anchor Point
b) Click to select the
location
for the new anchor point;
is added on the line.
Figure 86. Inline Anchor Point
Location
Selected
c) Click the point again to set the
location
on the line. The
changes to
.
Figure 87. Inline Anchor Point Set
6. Click on an anchor point and the Trash icon displays above it; click the Trash to delete the point.
Figure 88. Click to Delete Anchor Point
7. Use the ROI sliders in the Input tab to change the ROI width.
Figure 89. Bead Tool ROI Width
VE Series Smart Camera
62
www.bannerengineering.com - Tel: 763.544.3164
